S.V.Belting

Bare-Back V-Belts
Outstanding Features
Bare-Back V-belts are mainly designed for various clutching applications. The volume of surface rubber of the cover fabric is reduced to the minimum so that the clutching action can be done smoothly.

Application Examples
Bare-Back V-Belts are widely used in Tillers and Lawn Mowers.

Note:
Bare-Back V-Belt is available with A, B, C, 3L, 4L, and 5L cross-sections. The length of the belts will depend on the cross section of the product.

Multiple Banded V-Belts
Outstanding Features
The Multiple Banded V-Belts are Mitsuboshi banded V-belts which are especially engineered to handle the difficult problem drives where vibration, sudden shock loads or misalignment can cause belt turnover and belt whip.

Application Example

• Pulsating and shock load drives like Compressors, Crushers, Screening, Grinders, Hammer mills and Chippers.


• Vertical shaft drives like Agitators, Stirrers, Centrifugal separators and Mixers.

Maxstar Wedge V-Belt
Outstanding Features
Maxstar Wedge Belt is a series of narrow V-belt with remarkably high horsepower capacity compared to classical multiple V-Belt. This qualified Maxstar Wedge Belt is brought by the development of materials and high technology of Mitsuboshi.

Maxstar Wedge Belt can be used in the following cases:

Save Energy Drive
Efficiency of the drive unit is higher than the classical multiple V-belts drives.

Space Saving
Maxstar Wedge Belts make it possible to design the V-belt drives possible to design the V-belt drives with narrower and smaller diameter pulley because of high horsepower rating.

Cost Reduction
Smaller pulley and space will bring cost reduction of a drive unit.

Maxstar Wedge Banded V-Belt
Outstanding Features
Maxstar Multi Wedge Belts are banded together with tie band layer to form unitized belt sets. Its construction is designed in such a way so as to meet the regular Maxstar Wedge belt pulley dimensions. Maxstar Multi Wedge Belts prevent belt whip, turnover and coming off the pulley.

Maxstar Multi Wedge Belts are suitable for the following applications:

• For pulsating load: engines, compressors and positive displacement pumps.


• For shock load: hoists, crushers and presses.


• For long center distance layouts.


• For vertical shaft drives.

Fhp V-Belt
Outstanding Features
FHP Belts are designed to fit reverse bend applications. They are excellent in flexibility and fit small pulley diameters for light duty applications. FHP V-belts also have antistatic conductivity and heat resistance.

Sanwu Multiple Standard V-Blet/A, B, C, D, E
Red Label
With outstanding features like oil-resistance, heat-resistance and abrasion-resistance, our belts are suitable to be run at very high speeds. A good transmitting efficiency can be reached with our top class belts, even when they are operated at high temperatures like 90⁰C.

Green Label
Same class with the belts in white label is especially made for export purposes.